Iranian Journal of Energy
نشریه انرژی ایران
IJE
Engineering & Technology
http://necjournals.ir
1
admin
1028-3706
2322-1240
fa
jalali
1391
10
1
gregorian
2013
1
1
15
4
online
1
fulltext
fa
تاثیر روش تولید جریان مرجع بر مشخصههای جبرانسازی فیلتر فعال در سیستم قدرت
The Effect of Reference Current Generation Method on Compensation Characteristics of Active Power Filter in Electrical Power System
مدل هاي برنامه ريزي انرژی
Energy Planning Models
پژوهشي
Research
کاهش تلفات و صرفهجویی در مصرف انرژی از مسائل مهم مورد توجه در سیستمهای تولید، انتقال و مصرف انرژی الکتریکی است. یکی از اصلیترین عوامل افزایش تلفات در سیستم، اعوجاج هارمونیکی ناشی از وجود بارهای غیرخطی است که برای مقابله با آن، انواع فیلترهای فعال مورد استفاده قرار میگیرند. از مهمترین بخشهای کنترل عملکرد فیلترهای فعال موازی، تولید مناسب جریان مرجع فیلتر است. در این مقاله، با بررسی مهمترین روشهای کنترل و تولید جریان مرجع در فیلتر فعال و شبیهسازی هر کدام از روشها بر روی سیستم قدرت سهفاز در حضور بار غیرخطی، میزان تاثیر نوع روش انتخابی برای تولید جریان مرجع در عملکرد جبرانسازی فیلتر سنجیده میشود. مقایسه جامعی از نظر تاثیر هر روش در کاهش میزان اعوجاج هارمونیکی جریان، کاهش تلفات، افزایش ضریب توان، بهبود سرعت پاسخ و الزامات طراحی انجام شده است. در بحث جبرانسازی هارمونیکی، نتایج عددی حاصل نشاندهنده عملکرد مطلوبتر روش آشکارسازی با فیلتر میانگذر (BPF) است. همچنین وجود اعوجاجات ولتاژ تاثیری بر مشخصههای جبرانسازی این روش ندارد. در عین حال، به منظور جبران عدم تعادل بار، این روش کارایی لازم را نخواهد داشت و استفاده از روش توان راکتیو لحظهای (P-Q) پیشنهاد می-شود. با بررسی نتایج، اهمیت انتخاب مناسب روش استخراج جریان مرجع بر اساس اهداف جبرانسازی و امکانات طراحی در عملکرد فیلتر فعال مورد بررسی قرار گرفته است.
Energy loss reduction in power system is one of the most important issues in generation, transmission and distribution systems. The harmonic distortion which is generally injected by the non-linear loads to power system, is a significant factor increasing losses in power system. In order to eliminate these harmonics, active power filter is implemented. The appropriate generation of reference current is a main part of shunt active power filter control algorithm. In this article, the most common used theories for control and extraction of reference current in three-phase power system with non-linear load was simulated. Then the effect of selected method on active filter performance was analyzed and evaluated. A comprehensive comparison between control methods was performed in terms of harmonic cancellation and loss reduction capabilities, reactive power compensation, transient response speed and design requirement. The numerical results showed that “BPF” method has the best performance to improve total harmonic distortion (THD). In addition, voltage disturbances had no effect on its operation. However, this method did not represent good performance for unbalanced compensation. For this purpose, the using of reactive power theory (P-Q) was the most useful. The results showed that the selection of reference current generation method should be based on compensation purposes and design Limitations.
آشکارسازی جریان مرجع، اعوجاج هارمونیکی جریان، جبرانسازی ضریب توان، فیلتر فعال قدرت، کاهش تلفات انرژی الکتریکی
Reference current generation, Current harmonic distortion, Power factor correction, Loss reduction
0
0
http://necjournals.ir/browse.php?a_code=A-10-1-39&slc_lang=fa&sid=1
Mohsen
Hosseini
سید محسن
حسینی
Sm_hoseini@sun.semnan.ac.ir
10031947532846001243
10031947532846001243
Yes
Yousof
Alinejad
یوسف
علی نژاد برمی
Yalinejad@semnan.ac.ir
10031947532846001244
10031947532846001244
No