[Home ] [Archive]   [ فارسی ]  
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
Main Menu
Home::
Journal Information::
Articles archive::
For Authors::
For Reviewers::
Registration::
Contact us::
Site Facilities::
::
Search in website

Advanced Search
..
Receive site information
Enter your Email in the following box to receive the site news and information.
..
The 9th International Energy Conference
..
:: Volume 21, Issue 3 (12-2018) ::
IJE 2018, 21(3): 5-23 Back to browse issues page
Improving Data-based Wind Turbine Using Measured Data Foggy Method
Mojtaba Heidarzadeh Ghareveran * , ََAlireza Yazdizade
SBU , m.heidarzade@mail.sbu.ac.ir
Abstract:   (2085 Views)
The purpose of this paper is to improve the modeling of the data-driven wind turbine system that receives data from noise signals. Most of the data on industrial systems is noisely and data noise is inevitable and natural. The method and idea proposed in this paper, Data Fogging, significantly reduce the impact of noise on data-driven wind turbine system modeling, which is the basis of this method of changing the acceptable range of measured data. It will not eliminate noise in the system data, but will significantly reduce their impact on detection, modeling and fault detection. In this paper, the proposed method of artificial neural networks is used as a case study for modeling of wind turbine power transmission system of Kahak wind power plant. Noise and noisely information data applied to the system, modeling performed, and the results are reviewed. The results of the simulation presented in the tables and figures below illustrate the very good and accurate performance of the data fogging method in eliminating the impact of noise on system modeling, as the case of the wind turbine system proves. In fact, the impact of this method on real systems analysis is noise, because the noise in industrial systems has an impact on system analysis and greatly affects the accuracy of system identification, modeling and fault detection. Simulations of the method presented in this paper have been performed in MATLAB software. The reason for choosing this software to perform the simulation is that it is very powerful and reliable. In the research section of this paper, first a method and idea is presented and control analysis is performed and then in the software simulation section of this paper the proposed method is implemented and simulated on a real study system (wind turbine of Kahak wind power plant).
 
Keywords: بهبود اثر نویز, مدل سازی, توربین بادی, انرژی تجدیدپذیر
Full-Text [PDF 741 kb]   (523 Downloads)    
Type of Study: Research | Subject: Energy and Environment
Received: 2018/12/9 | Accepted: 2019/09/2 | Published: 2018/12/1
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA


XML   Persian Abstract   Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Heidarzadeh Ghareveran M, Yazdizade َ. Improving Data-based Wind Turbine Using Measured Data Foggy Method. IJE 2018; 21 (3) :5-23
URL: http://necjournals.ir/article-1-1403-en.html


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 21, Issue 3 (12-2018) Back to browse issues page
نشریه انرژی ایران Iranian Journal of Energy
Persian site map - English site map - Created in 0.04 seconds with 39 queries by YEKTAWEB 4645